one of us
| Yes, it would require a crush fit washer or shims to time it. It is .800" in diameter and 1/2x28 tpi. Thanks. |
| | | Posts: 876 | Location: Arizona | Registered: 30 January 2002 | 
IP
|
|
one of us
| If your barrel is threaded 5/8x24 you can use an adapter that threads onto your barrel and will allow the use of a 1/2x28 brake. I've used them myself.
Thanks. |
| | | Posts: 876 | Location: Arizona | Registered: 30 January 2002 |
IP
|
|
One of Us
| What did you have it on Bill, and how well did you think it worked? |
| | |
one of us
| PM sent. |
| | | Posts: 876 | Location: Arizona | Registered: 30 January 2002 |
IP
|
|
One of Us
| quote: Originally posted by Bill358:
If your barrel is threaded 5/8x24 you can use an adapter that threads onto your barrel and will allow the use of a 1/2x28 brake. I've used them myself.
Thanks.
It is the 5/8 diameter. I’m going to pass. good luck with the sale. |
| | | Posts: 1034 | Location: Central California Coast | Registered: 05 May 2007 |
IP
|
|
one of us
| OK, thanks for the reply. |
| | | Posts: 876 | Location: Arizona | Registered: 30 January 2002 |
IP
|
|
