One of Us
| Jim, will they work on a mark X, or the interarms whitworth Mauser actions?
Thanks |
| | |
one of us
| bowen475
Yes these safeties will fit the Mark X, Interarms Whitworth, Zastava Mauser 98 actions.
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 | 
IP
|
|
One of Us
| Jim, you have a PM.
Mike
Wilderness is my cathedral, and hunting is my prayer.
|
| | |
one of us
| PM responded to.
Have lots of this safety on hand
Monthly bump |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
one of us
| Monthly bump.
Still have lots of these right hand safeties on hand.
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
new member
| Jim you have a PM inbound. |
| | | Posts: 11 | Location: Wyoming | Registered: 11 October 2021 |
IP
|
|
one of us
| Bump
JW |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
one of us
| Back to the top
Just went thru and bagged some units up, have about 70 of these safeties just waiting for a new owner
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
one of us
| Monthly bump
These parts are waiting for a rifle to go one.
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
one of us
| Monthly bump
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
one of us
| My check is on it's way for 1. |
| | |
one of us
| Can I assume this installs correctly on an early FN commercial action, 1951 production. |
| | |
One of Us
| They do install correctly but need to be fitted
Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild
|
| | |
one of us
| BTT
Still have a lot of units from this older batch.
FYI I have started on a new batch and due to increased cost of steel and cutters the price will be going up on these safeties in Jan, 2023
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
One of Us
| |
| | | Posts: 145 | Location: Woodville WI | Registered: 25 September 2004 |
IP
|
|
new member
| I’ll take 3. Sending you a PM |
| | |
One of Us
| James, do you make one for the P-17? I have another AR member here that is interested in my custom 375 H+H, but the previous owner removed the safety in the 'customizing' process. |
| | | Posts: 4440 | Location: Austin,Texas | Registered: 08 April 2006 |
IP
|
|
one of us
| No Enfield units, just Mausers
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
One of Us
| Thanks for the reply. |
| | | Posts: 4440 | Location: Austin,Texas | Registered: 08 April 2006 |
IP
|
|
one of us
| As of 1/1/2023 please note the new cost, as updated on page 1 of this thread
I have about 30 units on hand, and am getting steel in to start a new batch of them
Thanks to all who have bought from me in the past
James Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
One of Us
| Do you still have units available? Thanks. |
| | | Posts: 296 | Location: Missouri | Registered: 22 May 2007 |
IP
|
|
One of Us
| Go to his web site and order them. Wisnersinc.com.
Free plug! Because I like them so much. |
| | |
one of us
| Sorry Tom, cant order them from that website, just my personal contact info there
My info is on page 1 of this thread as well.
Have about 25 left on hand, am getting ready to start on the next batch.
BTT
J Wisner |
| | | Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
