Looking for above to feed a recently acquired hammer drilling, 16ga double over 9.3x72 rimmed rifle cartridge.
Please PM me with what you have and willing to sell.

You have a PM .

I have the dies, Thanks GeorgeGibbs505!!

I am looking for brass, unfired or once fired and ammo, prefer not S&B or PPU available on AmmoSeek.

CHEERZ,

I’ve got three boxes of original RWS ammo but it looks to be Berdan primed so probably best for display - if you’re interested.
I think I have some bullets - will have to dig a little and let you know.

Ken,
THANKS SO MUCH!!
My hunting partner in North Dakota, Dave Bickle, will contact you directly.
We have a set of RCBS dies coming from GeorgeGibbs505.
Still looking for some old factory ammo with the smaller diameter bullets of early drillings.

GREAT GUYS ON AR!!

CheerZ,

HUVIUS-
YES we are interested in RWS ammo and bullets if you locate them. I doubt RWS would be Berdan primed?? Some 60s Kynoch cordite is.
Please PM me with details or call me.

Thanks much!!

Steve
Mobile 253 677 8950

I have found with most of the older 9,3x72R rifles that I have slugged and shot, that most will shoot quite well when loaded with the 200 grain .358" diameter RN bullets made for the .35 Remington. The older barrels often measure closer to .360" groove diameter than anything larger.

Also, if you are still looking for brass send me a PM.