A nice 1909 bottom metal fitted with a straddle floor plate, a nice lever release with straight line cuts, and a slimmed trigger guard.

Two different grades listed below

Check, USPS MO, or CC via my website. Click here:
Commercial Mauser 98 Bottom Metal

Commercial Mauser 98 Bottom Metal - Grade B

Machined from US Made stress relieved 1018 bar stock (rolled in Orrville Ohio, just 20 minutes from our shop!). Straddle floor plate is machined to near finished dimensions with minimal stock left for custom fitting. This part WILL require fitting. Offered as machined and ground.

Made for Argentine 1909 Trigger guards, this floor plate is a beautiful improvement to any custom Mauser.

As machined is simply as the part comes off the mill. The radius will be rough machined and will need filed and polished. All fitting/engagement surfaces are machined with minimal stock left for fitting.

Ground has the radius outside ground to clean up the surface from machining. The ground surface will require minimal polishing. All fitting/engagement surfaces are machined with minimal stock left for fitting.

https://www.myersarms.com/stor...oor-Plate-p287382978

You can pay via CC OR mail payment via the website. If you have any questions, do not hesitate to email me. Please do not PM me here on AR.

Thanks!

bump!

What cartridges are these magazine/floor plates made for
Thanks