THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
North Fork bullet load for 7mm/08
 Login/Join
 
one of us
posted
I'm looking for a set-up for my girlfriend's 7mm/08 for Alaska Caribou and NZ Tahr.

Has anyone loaded the 140 gr North Forks in a 7/08?

Any other pet loads for the 7/08?
 
Posts: 898 | Location: Southlake, Tx | Registered: 30 June 2003Reply With Quote
one of us
Picture of Bob in TX
posted Hide Post
Hey TT,



I carry one of those "girly guns". I use 41.5 grs. of RL-15 for the 140 gr. Partitions in my 7mm-08. It is not as temperature sensitive and shoots sub-MOA for me. I am using Win. brass and WLR primers.



A girlfriend that hunts......one can dream!!



Good Hunting,



Bob
 
Posts: 3065 | Location: Hondo, Texas USA | Registered: 28 August 2001Reply With Quote
one of us
Picture of floridabigfish
posted Hide Post
Other:

140 Barnes TSX, 47.7 H414, Winchester Brass, CCI 200 primer,
seated @ 2.775 OAL. Velosity 2889 fps and .5 MOA in my gun.

140 Partition, 47.0 H414, ....... 2815 fps, 1.0 MOA.

My gun really likes the TSX but it's been too hot to work up loads with any other powder to compare. Waiting for fall
 
Posts: 318 | Location: Pinhook River, Florida | Registered: 27 March 2004Reply With Quote
one of us
Picture of Bob in TX
posted Hide Post
I'm ordering the 140 gr. TSX's for mine as well. I am going to start with the RL-15 again.

Bob
 
Posts: 3065 | Location: Hondo, Texas USA | Registered: 28 August 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia