Go | New | Find | Notify | Tools | Reply |
one of us |
Just bought some new cases for the winnie,It seems a shame to F/L size and start stretching them straightaway, can you just neck and trim them? regards griff | ||
|
One of Us |
I just run them through the full length sizer with the expander ball removed and then inside and outside chamber. | |||
|
one of us |
You can size them any way you like but the neck needs to be sized to get them nice and round before chamfer and loading. | |||
|
One of Us |
I just neck size new cases. No need to full length size the new cases. Don | |||
|
One of Us |
I agree ...... just neck size. Ideally.... new cases should be ready to seat the bullet. BUT this is almost NEVER the case! | |||
|
One of Us |
Personally I FL each case, trim, chamfer in and out, deburr the flash hole and then square up the primer pocket but, thats just me. I like to FL to make sure everything is trued up and it gives a nice neck. Like others have said, it's your choice! ______________________ Smedley ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
one of us |
thanks guys, just did a little experiment and F/L sized and just neck sized.F/L were 12 thou longer on avg than the just neck sized. That brass has to come from somewhere. regards griff | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia