THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Partitions with Cannelure?
 Login/Join
 
one of us
posted
Where can I get .308, 180-grain partitions with a cannelure? I tried all the uusual suspects (Grafs, Midway, Huntington, etc.)with no luck.
 
Posts: 1443 | Registered: 09 February 2004Reply With Quote
One of Us
Picture of adamhunter
posted Hide Post
Seems like I read on Nosler's site or in their manual that they only make those for ammo companies that load their bullets and said since handloaders tend to experiment with different seating depths, why have a cannelure?


30+ years experience tells me that perfection hit at .264. Others are adequate but anything before or after is wishful thinking.
 
Posts: 854 | Location: Atlanta, GA | Registered: 20 December 2007Reply With Quote
One of Us
posted Hide Post
They are called "Seconds".

Sometimes you can get them here:
http://www.shootersproshop.com...y-2nds/In-Stock.aspx

It looks like they are out of stock at the moment, but they did have an over run of the 200gr AB for Winchester.
 
Posts: 3034 | Location: Colorado | Registered: 01 July 2010Reply With Quote
One of Us
posted Hide Post
Hornaday used to make a tool to cut a cannelure anywhere on a bullet. May still be in their catalog.
 
Posts: 2173 | Location: NORTHWEST NEW MEXICO, USA | Registered: 05 March 2008Reply With Quote
one of us
posted Hide Post
CH4D makes a cannelure tool.

http://www.ch4d.com/catalog/?p=90
 
Posts: 1615 | Location: Washington State | Registered: 27 May 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Antelope Sniper:
They are called "Seconds".


Actually I call them A-Frames!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of JBrown
posted Hide Post
quote:
Originally posted by GAHUNTER:
Where can I get .308, 180-grain partitions with a cannelure? I tried all the uusual suspects (Grafs, Midway, Huntington, etc.)with no luck.


I don't know which Nosler Partitions currently have cannelures, but a a few years ago 308 and 338 did not have canncelures, but 375 and 416s did.

You might look into using the Lee factory crimp die as it allows you to crimp without a cannelure.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
one of us
posted Hide Post
Why do you want the Partitions with cannelure?
 
Posts: 1205 | Location: Minnesota | Registered: 07 February 2004Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by steve4102:
Why do you want the Partitions with cannelure?
Hey, Steve, you beat me to the 64-dollar question! A cannelure, particularly one applied after the manufacture of the bullet, is a great way to potentially degrade accuracy. The only purpose a cannelure serves is to make a place for a mouth crimp. Again, crimping is a great way to degrade accuracy and is unnecessary except in very limited instances with certain cartridges and actions.
 
Posts: 13263 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
A cannelure can act as an assist to holding the lead core inside the jacket if the cannelure is pressed into the jacket.

Many of Hornady's bullets are cannelured this way and frankly, I've not noticed a loss of accuracy!.....at least of consequence!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
A cannelure can act as an assist to holding the lead core inside the jacket if the cannelure is pressed into the jacket.


That's true. And too, some of the most accurate bullets I have EVER had was some bulk Hornady 55gr bullets that I bought to Pdog shoot with and they had a channelure.


Aim for the exit hole
 
Posts: 4348 | Location: middle tenn | Registered: 09 December 2009Reply With Quote
one of us
Picture of MuskegMan
posted Hide Post
quote:
Originally posted by steve4102:
Why do you want the Partitions with cannelure?


To hold the bullets at the loaded seating depth.

A 338 will "help" seat your bullets further due to recoil. Ask me how I know . . .


 
Posts: 2097 | Location: S.E. Alaska | Registered: 18 December 2003Reply With Quote
one of us
Picture of JBrown
posted Hide Post
quote:
Originally posted by vapodog:
A cannelure can act as an assist to holding the lead core inside the jacket if the cannelure is pressed into the jacket.

Many of Hornady's bullets are cannelured this way and frankly, I've not noticed a loss of accuracy!.....at least of consequence!


I am a big, big fan of the Remminton .30 180 grain Cor-loct that has the pressed in cannelure(at 2700fps). The are cheap and accurate and have killed everything I have ever shot with them, and it has only taken one shot. "The deadliest mushroom in the woods" is not just a cheap advertising slogan....


And as far as a cannelure degrading accuracy, I don't doubt it one bit, but 99% of the time you won't notice it in a hunting rifle.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia