THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Looking for loading data - 9.3x64 with 320gn Woodleigh

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Looking for loading data - 9.3x64 with 320gn Woodleigh
 Login/Join
 
One of Us
Picture of Bwana_500
posted
Havent been able to find anything for the 320gn bullet in a 9.3x64. If anyone can point me to a source, I would appreciate it.
 
Posts: 426 | Location: Australia | Registered: 03 September 2006Reply With Quote
One of Us
posted Hide Post
PM our forum member Atkinson here and I am sure he will have some data for you.
 
Posts: 2267 | Location: Maine | Registered: 03 May 2007Reply With Quote
one of us
posted Hide Post
Bwana Click on " Favorite Loads" then click on Find, type in 9.3x64 and click on go. You will find lots of 9.3x64 loads right here on this forum. Good Luck.
 
Posts: 2443 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
one of us
posted Hide Post
RWS cases
Fed 210 Primers
320 gr. Woodleigh

NOTE: Always start 10% below suggested loads and work up a grain at a time..

62 grs. H-4895 320 Woodleigh
Chronographed at 2410 FPS (10 shots taking out high and low)

Same 320 with 65 grs. of H4895 was fast and accurate at 2495 FPS and 1/2 inch 3 shot groups

65 grs. H-4350 320 woodleighs...2357 av. a bit slow and could probably increase the powder

300 gr. Swifts &
293 gr. bullet? 67-IMR4320 2620 FPS
75-IMR-4350 2629 FPS
77 was max (not chronographed)


The 300 and 320 gr. bullets are deadly on buffalo, Lion and ideal on the larger plainsgame..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of Bwana_500
posted Hide Post
quote:
Originally posted by snowman:
Bwana Click on " Favorite Loads" then click on Find, type in 9.3x64 and click on go. You will find lots of 9.3x64 loads right here on this forum. Good Luck.


Thanks. Am not a fan of the favourite loads concept, so never looked there. I did search the forum without a result, but searching that specific forum produced a result straight away.
 
Posts: 426 | Location: Australia | Registered: 03 September 2006Reply With Quote
One of Us
Picture of Bwana_500
posted Hide Post
quote:
Originally posted by Atkinson:
RWS cases
Fed 210 Primers
320 gr. Woodleigh

NOTE: Always start 10% below suggested loads and work up a grain at a time..

62 grs. H-4895 320 Woodleigh
Chronographed at 2410 FPS (10 shots taking out high and low)

Same 320 with 65 grs. of H4895 was fast and accurate at 2495 FPS and 1/2 inch 3 shot groups

65 grs. H-4350 320 woodleighs...2357 av. a bit slow and could probably increase the powder

300 gr. Swifts &
293 gr. bullet? 67-IMR4320 2620 FPS
75-IMR-4350 2629 FPS
77 was max (not chronographed)


The 300 and 320 gr. bullets are deadly on buffalo, Lion and ideal on the larger plainsgame..


Thanks, that gives me plenty to work with. Its great that they are Hogdon loads since I can get the same as ADI powders locally.
 
Posts: 426 | Location: Australia | Registered: 03 September 2006Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Looking for loading data - 9.3x64 with 320gn Woodleigh

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia