The Accurate Reloading Forums
Best Powder for 375 H&H Lead bullets

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/975105651

06 December 2004, 13:26
BuddyK-9
Best Powder for 375 H&H Lead bullets
What is the best powder without having to use any filler for lead gas checked 375 H&H bullets with approximate weight of 275 grains?
06 December 2004, 14:59
Savage99
I use IMR 3031 and get about 2000 fps with a 250 gr cast bullet. IMR's SR 4759 was made to be bulky and be used without a filler over the powder.
09 December 2004, 04:59
bobc
I've had preliminary good results with a load of Unique from Lyman cast bullet manual. I need to chrono, but I'm probably at 1500 fps. No filler and it doesn't seem to be position sensitive. bob
09 December 2004, 05:27
jpb
RDub is right, but I can't get that powder here in Sweden.

I've had great luck with 13.0gr of Red Dot and a 255gr lead bullet. No filler, and use a Magnum primer. This yields 1300fps (hey, I didn't say it was fast! The same load worked perfectly with some 280gr cast bullets too.

Make damn sure that you load carefully! I turn the cases over so that I cannot double charge a load.

jpb