THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
rcbs lube die
 Login/Join
 
new member
posted
thinking about getting a lube die for four of the calibers that I reload for and am wondering if they are worth the money.thank you for your input
 
Posts: 19 | Location: Minn | Registered: 25 December 2004Reply With Quote
Moderator

Picture of Mark
posted Hide Post
I'm a big fan of spray lubes, you may want to try one of those first. If I am doing case forming I use imperial sizing wax.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7778 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
one of us
posted Hide Post
If you are using a single stage press, you have to handle the cases anyways so screwing a die in and out and doing a whole extra step does not really seem time-effective to me.

Lube dies come in handy if you are using a progressinve press where you are unable to handle the cartridges after every stage.

I stock all the sizes, I think there are 4.
I have always heard good things about them from people who use progressives.

-Spencer
 
Posts: 1319 | Registered: 11 July 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia