THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
pre-64 mod 70 243 & 257 roberts
 Login/Join
 
One of Us
posted
I have a 243 featherweight and 257 r standard, what bullet weights do you find to typically be most accurate in each?. Thanks in advance


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
One of Us
posted Hide Post
I have several m70 257's, 100 grain bullets are best.

Perry
 
Posts: 2252 | Location: South Texas | Registered: 01 November 2005Reply With Quote
One of Us
posted Hide Post
my feather weight 257 shoots 100 or 120's just fine.
if I had to stick with/pick just one it'd be darn tough.

I shoot 58gr varmint bullets in my 243 so [shrug] take that for what it's worth.
 
Posts: 5004 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
One of Us
posted Hide Post
thanks guys


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
one of us
posted Hide Post
Try the 85 gr Nosler Partition. It is a screamer and folks tell me it kill like lightening on deer size game.

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13092 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
one of us
posted Hide Post
What will shoot in other guns may not shoot in your in that each gun is an inity unto itself..Your answer is on the benchrest with you shooting it..Most pre 64 mod, 70s shoot well enough to hunt with but for your best result go with my advise..the bench won't lie.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42232 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of chuck375
posted Hide Post
I had a BDL in 243 for about 7 years. It was a great gun. Traded it in on a BDL in 270 when I moved to Montana. The grizzlies would snicker at me when I elk hunted with my 243. In my 243, I used Sierra 70g HPs for varmints (shot a lot of those) and Speer 105g spitzers for deer, black bear and elk. There are better bullets now, but got two elk (one shot kills) with the 105g Speer spitzer.


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
 
Posts: 4802 | Location: Colorado Springs | Registered: 01 January 2008Reply With Quote
One of Us
posted Hide Post
thanks again guys was looking for starting point in these pre-64's from people with prior experience with them , I know there are no short cuts.


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
One of Us
posted Hide Post
My pre 64 257 Roberts is long throated.







I think all pre 64's were. The last owner, a very smart man removed all the short action crap, that is removed the bolt stop on the extractor collar, installed a long action magazine box, and it was all to the good. I am able to seat the bullet out to 7 X 57 mm lengths, and just be off the lands. And it shoots well because of this. Compare my OAL with book OAL. There is no need for a 257 to be short seated in any medium or long action.

 
Posts: 1233 | Registered: 10 October 2005Reply With Quote
One of Us
posted Hide Post
your rifle is better looking than mine ,I also have the magazine box and extractor you make reference to, hope mine will shoot as good as yours.


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
One of Us
posted Hide Post
I was wrong I used those parts on my 6.5 x 55, will start looking for more.


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
one of us
posted Hide Post
I killed enough deer and elk in my youth with a 25-35 and then a 250-3000 to be pretty sure a 243 will kill them just as dead, keep the range under 200 yards and place the bullet behind the shoulder worked for me every time..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42232 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mike Ray:
your rifle is better looking than mine ,I also have the magazine box and extractor you make reference to, hope mine will shoot as good as yours.


Old man Wiesner's used to make those parts, but he died, and his son retired on the old man's money.

It is, however, well known, that pretty rifles shoot better than ugly rifles. So, get the polish out and buff everything, and everything will be great again. hilbily
 
Posts: 1233 | Registered: 10 October 2005Reply With Quote
One of Us
posted Hide Post
slam fire, that's good advice will make a nice winter project. I'll probably never hunt with it, but wanted to see how it will do. Never shot a 257 roberts but thinking of barreling a 36 mex in it.


No matter where you go or what you do there you are! Yes tis true and tis pity but pity tis, tis true.
 
Posts: 573 | Registered: 09 November 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia