Does anyone have any data for the Scirocco II
6.5 130 gr. for the .260? Thanks in advance. Jim

Try 39gr to 40gr of Varget and 42gr to 43gr of IMR-4350. Seat the out as far as you can.

Thanks for the info. I loaded some up with 4350 tonight and will let you know how they work.

I use 48gr H4831SC and 129gr Hornady SPs seated/crimped to the cannelures with Rem brass and Fed 210s in my .260 Kimber 84M with very pleasing results, both on paper and on deer. I haven't played with Scirocco's (I don't use poly-tipped bullets other than varmint loads). This is a near max load for my rifle so as usual, start lower and work up carefully.

I haven' tried them yet, but for bullets in the 120gr-140gr wt. range, H4359, H4831sc, RL22 & IMR7828ssc are all top performers for accuracy & vel. For my 260ai, Varget has not been a great powder.

Thanks for the input guys. I appreciate it. The guy I load for has a cow tag starting next Friday. I'll let you know how it works out. BTW he decided to use 130gr Accubonds. I'll let you know how it works. I loaded 42 grs. of IMR 4350 under the 130gr Accubond. Win. std primer in Remington brass. Jim

The guys son got a shot at a cow just over 300 yards. He put it right behind the shoulder and she took a couple of steps and piled up. The bullet was found under the hide on the off side. Pretty damn good performance I'd say! Jim