THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
9.3x64 & Varget
 Login/Join
 
One of Us
Picture of Kabluewy
posted
Does anyone know a good load for the 9.3x64 using 250gr bullets and Varget powder? A friend of mine wants to know, and he has no computer.

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
One of Us
posted Hide Post
The only data I have using Varget says 64.5grs max for a velocity of 2642fps. Probably start at 61grs and work up.

I just finished my 9.3X64 last month, and started it out with IMR4350. A really under appreciated cartridge in the US.

Jeremy
 
Posts: 1481 | Location: Indiana | Registered: 28 January 2011Reply With Quote
One of Us
Picture of Kabluewy
posted Hide Post
Thanks.
I told him that my guess would be to start with 60grs and work up. I don't like guessing that way, but it was a little more than a guess, since Hodgdon shows 59+ as max for the 9.3x62. If it was my rifle, I would have tried it, but he has to make his own decision about that.

I'll pass on the info.

I have a wildcat 9.3 with very close to the same case capacity of the 9.3x64, but I haven't tried Varget yet. I tried H4895 and it worked so well that I just quit experimenting with loads.

Thanks again


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia