THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Question about CCI primers...
 Login/Join
 
Pete E
Moderator
posted
I want to work up a new load for my .308 using Ramshot TAC riflepowder. On the box itrecommends using a CCI 200 primers. Out of interest can anybody tell me if this is a standard or magnum primer and could I use Federal 210's (which I have on hand) instead if I work up a load carefully?

Thanks,

 
Posts: 5684 | Location: North Wales UK | Registered: 22 May 2002Reply With Quote
ricciardelli
one of us
Picture of ricciardelli
posted Hide Post
You can use the Federal 210 instead of the CCI-200...just work the load up slowly.

------------------
http://stevespages.com/page8.htm

 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
denton
one of us
posted Hide Post
There was some data published on this board a while back that indicated that the Federal 210 produces 3-5,000 higher peak PSI than the CCI 200, with about the same muzzle velocity, in 30-06 loads.
 
Posts: 2281 | Location: Layton, UT USA | Registered: 09 February 2001Reply With Quote
tsturm
one of us
posted Hide Post
quote:
Originally posted by Pete E:
I want to work up a new load for my .308 using Ramshot TAC riflepowder. On the box itrecommends using a CCI 200 primers. Out of interest can anybody tell me if this is a standard or magnum primer and could I use Federal 210's (which I have on hand) instead if I work up a load carefully?

Thanks,

CCI 200 is a standard large rifle primer

 
Posts: 2368 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia