The Accurate Reloading Forums
Hodgdon Benchmark in the .223 Remington

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/94510175

26 February 2002, 23:49
Bubster
Hodgdon Benchmark in the .223 Remington
I'm looking for a good "recipe" for a .223 Remington using Hodgdons Benckmark. I hate to picky on bullet selection but I'd like to primarily stick with 40 gr. to 50 gr. V-Max however any information on bullet weight would be greatly appreciated as this will be used for groundhogs at ranges of less than 300 yds. Thanks to all in advance.
27 February 2002, 09:09
ricciardelli
http://stevespages.com/page8c.htm

------------------
http://stevespages.com/page8.htm

28 February 2002, 04:53
Hot Core
Hey Bubster, Just tried some of the Benchmark with 50gr bullets last week. It seemed to want to group better than I was shooting, but 5-shot groups under 1" were common for all the various Loads I tried.

However, what works well in my rifle might not shoot worth an "Impeached-Clinton" in your rifle. There is no such thing as a "Perfect Load" for use in every rifle of the same caliber.

Just start 2.0gr below the MAX Load shown on the Benchmark jug, load 5, increase the load by 0.2gr and load 5 more, etc. Shoot them and see which one your rifle likes the best while watching closely for Pressure Signs.

That is the way I do it. Then you can fine tune the final Load by varying the Seating Depth.

------------------
Good hunting and clean 1-shot kills, Hot Core