29 November 2003, 13:30
<Dogger>Nosler Partitions in the 7x57
I have never worked with Nosler Partitions. I just placed an order for the 140 Grain Noslers and I can't wait to try them out with Reloder 19. The load data in Nosler #5 has me drooling.
What experiences do you have with Partitions in the 7x57, and what are your best recipes?
v/r Dogger
29 November 2003, 14:25
jstevensIf it's a Ruger or CZ and has a long throat, I can use 53.5 gr. H414 with the 140 Nosler and it goes 3038 fps out of a 22 in. barrel. This is in Win. cases and should be worked up to as should any top load. I think RL19 should also work well, I just haven't tried it. My standard load is 50.5 H414 with the 160 Nosler which gives 2817 fps, shoots 1-1.25 in. and kills anything that's hit well. This is my favorite hunting round, and I've shot a lot of the latter load.
30 November 2003, 05:23
BangI have used both R 19 and H414 with the 140gr. partitions, love both of them. I get good accuracy and good velocity with both powders. If i had to choose between the two though, I would choose H414, because it measures easier than R 19. But don't get me wrong both are great in the 7 X 57.
I use 48gr. of H414 and get 0.625 groups with 2858fps. With R 19 I use 51.5gr. and get 0.500 groups with 2801fps. These loads are for my gun so work up slowly. By the way my velocities are chronographed for ten shots, max difference between velocities on each powder was 30fps. Good enough for me... Hope this helps you
Britt
30 November 2003, 05:31
beemanbeme140gr np's work very well in my 7-08. However, I use H4895.