THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Which Powder HornadDY 225Gr H&H...
 Login/Join
 
one of us
Picture of Enigma
posted
Hello folks,

I'm looking for the most accurate powder when pushing the Hornady 225Gr spire point out of my 375 H&H. My tube loves RE15 with 270 Gr bullets, however, I never had any luck with the lighter bullets. So here I am, asking for your most accurate powder with that particular bullet.

Thank you,

Maurice
 
Posts: 347 | Location: Canada | Registered: 30 August 2004Reply With Quote
one of us
posted Hide Post
I haven't done it, but if I were contemplating using this light bullet I would likely first try either H/IMR 4895 or IMR/AA 4064.
 
Posts: 13253 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
posted Hide Post
I have had good luck with 235 gr. Speer bullets and RL 15.
 
Posts: 2173 | Location: NORTHWEST NEW MEXICO, USA | Registered: 05 March 2008Reply With Quote
One of Us
posted Hide Post
IMR 4320 may do the trick...
AK
 
Posts: 16798 | Location: Michigan | Registered: 21 February 2006Reply With Quote
one of us
Picture of Enigma
posted Hide Post
Thanks for your input guys. I will try IMR 4320, might try 4064 for the heck of it to...
 
Posts: 347 | Location: Canada | Registered: 30 August 2004Reply With Quote
one of us
posted Hide Post
4320 might do it for you. 4320, 4064, and 4895 are virtually the same buring speed, although 4320 might average just a tad slower. The other two seem to trade places depending on the case capacity and bullet weight. I'm having great luck with the new IMR 4007 which sits right between 4320 and 4350 in burning rate in a couple of cartridges, but it might be a trifle slow for your intended usage.
 
Posts: 13253 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia