I've got a box of Remington 180 grain Accutip bullets, some Remington brass, and some Fed. 215 primers. Anyone got a good handload for that combination?

Though I haven't used that specific bullet, I am using R-P brass and Fed 215 primers in my .300 H&H. It seems to shoot every 180 grain bullet I've tried through it into a 3/4" group using 73 grains of IMR 7828 SSC. Start lower than this, of course, and work upward as pressure indications allow. My load runs around 2950 fps from a 24" barrel.

I've found the .300 H&H not at all challenging to work with.

My 721 likes 70 grains H4831SC with several 180-grainers. Not a screamer, but accurate. R-P brass won't last as long as W W and watch Hornady brass for chambering (get a good chamfer).