The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 300WM 1-11" twist and the 200gr bulletsGo | New | Find | Notify | Tools | Reply | |
| 300WM 1-11" twist and the 200gr bullets | Login/Join |
one of us |
I have a T3 300WM with a 1-11" barrel twist.I have success loading the higher BC 180gr bullets.Has anyone had success with the 200gr bullets?.Nosler lists H4831 as their most accurate powder with this caliber and bullet weight.I was thinking about starting with the accubond.Thanks RB Red comyn of Altyre | ||
|
One of Us |
There's folks using 1-12 twist....go for it. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| one of us |
Even if the Accubond should not stabilize in your barrel, try the Nosler Partition, it is a good deal shorter than the AB. As we know, in reality it is the length of the bullet that is the deciding factor, as opposed to the weight - although we think of bullet weight vs. twist rate, as an approximation. - mike ********************* The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 300WM 1-11" twist and the 200gr bullets
Visit our on-line store for AR Memorabilia