H4831 and 150 gn bullets any one have some data
on this powder and bullet weight,I cant seem to find any.

My Hodgdon book shows a max charge of 65.0 grains, for a velocity of 2997 with a 26 inch barrel. Pressure is 53,400

H-4831 From 57.2 grains to 67.5 grains
CCI-200 Primer

Reloader Len
If you are referring to the 7MM Rem Mag, loads for the 150 gr bullets using H4831 are listed in Hodgdon's #26, Nosler #4, and Sierra #3. Each of these manuals list a maximum load between 63 and 65 grains for a muzzle velocity between 3000 and 3100 fps.
In 1997 I did some load developement for a friend's Sako in 7MM Rem Mag using Nosler 150 gr balistic tips and CCI 250 primers.
I worked with H1000, RL22, and H4831. I found that this rifle produced the best accuracy with 64 gr of H4831 and MV at 3050. The rifle was capable of producing 3200 fps and more but accuracy dropped off quickly above 64 grains.
Hope this helps,

Idaho Shooter

The load that works for my ruger is 63gr h4831 140 gr nos part.cci mag primer. For my sav. 64.5 gr h4831 140 gr nos part, cci mag primer. Niether load is crimped.Both loads are under 1" @100 yds. Good luck

My Rem 700 would not get nearly those velocities with those charges.
However, here are my loads.

140 Sierra 70 gr H4831 3110 fps
"" 70 gr N205 3250
"" 71 "" 3320

150 Herters 68 gr N205 3218 fps

154 Hornady 70 gr H 4831 3144 fps

160 Nosler 68 gr H4831 3085 fps
"" 68 N205 3081
"" 68.5 N205 3115
"" 69 N205 3174

175 Nosler 66gr H4831 2945 fps
"" 66 N205 2969

These loads are obviously hot. Start at the handbook levels and work up carefully, checking for signs of high pressure.

Jerry

Thanks Guys ! Now i have some were to start!