The Accurate Reloading Forums
Re: ?.260 Remington Loads?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/8931028

27 September 2004, 18:54
martinbns
Re: ?.260 Remington Loads?
I just got one of these, mine is a M700 mountain rifle LSS, i am playing with reloader 19 and 125 gr partitions? have any of you got specific loads for the 125 r partitions?
28 September 2004, 09:36
Rogue6
Nosler shows 47 grains of R19 as max. Your rifle will have a sweat spot within a grain of or two of that.
28 September 2004, 13:55
Idaho Shooter
The Sierra #5 manual and the Hornady #6 each list loads for the 260 Rem. I have worked up loads for my model 77 all weather using Rem bulk 120 gr bullets from Midway and with 120 gr NBT's. I have had no trouble reaching 3000 fps with either bullet in combination with H414, IMR4064, and with H4350, though my rifle requires about 2.5 gr more powder to reach a specific velocity than suggested from the Sierra manual. I have currently loaded 100 rds of 120 gr Rem over 43.0 gr IMR4064 @ MV 2950 fps(1 gr over listed Max Load in Sierra #5) for use this deer season. I can only say that accuracy is adequate for deer hunting, as this rifle is now set up with iron sights.
I can't argue with the earlier recomendation of Partition bullets or any other premium type, but I am very comfortable with the use of Balistic Tips or the Remingtons mentioned above on deeer sized game. My son brought home a nice 2 point buck mule deer 2 years ago using this rifle with the 120 gr NBT.
09 September 2004, 18:42
B17G
Any bullet weight will work quite well in the 260.,

If you are looking for fast and flat shooting, the 100 grain Partition with a load of 43.5 grains of IMR 4064 will equal a 25/06 any day with an MV of 3350 fps out of my Ruger 77 in 260.

The 120 grain loads also are great, as is the 125 partition and the 129 grain Hornady. Rl 15 42.5 grains with a 125 or 120 grain bullet are another of my favorite loads.

40 grains of W 748 with a 120 grain bullet also gets honorable mention for accuracy.

As always, work up.

For the 140 grain bullets I usually load those in my 6.5 x 55.

The best bullet for the 260 is the Nosler 125 grain partition in my opinion.

Cheers and good shooting
seafire
09 September 2004, 15:25
BIG SAM
A partner of mine has just bought a .260 Rem. in a Ruger Mod. 77 with a 1X8" twist and we are looking for the preferred load for this caliber.

The main question is which is the best bullet weight? The game will be deer at 100 yards or less.

120 gr.?

140 gr.?

Thanks,

Sam
eclemmons@hotmail.com
10 September 2004, 06:09
vines
SAM, I load the .260 rem. alot for white tail deer. I load 41.0 grains of RL-15 with 120 grain sierra. CCI-200 or 250 primer at 2944 fps. with ruger M-77 very flat shooting.