THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
range for 5.56 case lengths
 Login/Join
 
new member
posted
Good Morning All. I have question regarding the range of case length for 5.56 cases. I have lengths ranging from 1.740" - up past 1.760". I was taught to trim anything over 1.755" down to 1.755". Is this good practice? Is there a minimum length that I should discard any pieces that are under that length. Any other thoughts on case length max and min would be appreciated. Thanks


sapper
 
Posts: 1 | Registered: 08 June 2017Reply With Quote
one of us
posted Hide Post
I only trim when the case length is over 1.76. If it is less than that, I just move on. More then that, I trim to 1.750.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
There is no real minimum for an AR blaster; I trim them all to the absolute shortest length and then they will be lost before they grow over max.
 
Posts: 17393 | Location: USA | Registered: 02 August 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia