THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Powder/Primer storage poll
 Login/Join
 
One of Us
Picture of M4Finny
posted
Please consider taking part in this poll and providing your advice to others.

Thanks,

Fin

Question:
What do you use to remove moisture from your powder and primer storage area or cabinet?

Choices:
Nothing
Electric device like Moisture King
Chemical dessicant like Damp Rid
Never considered it important
I load as fast as I can shoot!

 


Psalm 109:8 "Let his days be few; And let another take his office."
 
Posts: 31 | Location: Michigan | Registered: 03 November 2009Reply With Quote
one of us
posted Hide Post
I use a commercial dissicant. The only reason I do that is because in a past life, I got it free. I have never had enough moisture to turn it even slightly pink in over 20 years.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
One of Us
posted Hide Post
One smart fellow who is a regular poster in here but I can't remember who, told about how he kept a bowl of rice in the bottom of his gun locker. It was a lot cheaper than other stuff. If it will keep salt shakable, I don't see why it wouldn't keep your powder dry to have a bowl of rice in your powder locker.
I have a large metal locker that I keep bullets, brass, powder, primers, and general reloading stuff in. I keep a tupperware bowl of rice in the bottom of it. With a bunch of holes drilled in the top.
 
Posts: 1287 | Registered: 11 January 2007Reply With Quote
One of Us
Picture of M4Finny
posted Hide Post
Very smart fellows indeed! Both you and he. I personally forgot about using rice. Despite the fact that I used a baggie full of rice to dry out a cell phone I once dropped into a sink full of water! Mad

Three days later, the phone was a s good as new. Thanks for that suggestion, I hope that these posts are helping someone out there.


Psalm 109:8 "Let his days be few; And let another take his office."
 
Posts: 31 | Location: Michigan | Registered: 03 November 2009Reply With Quote
One of Us
posted Hide Post
This is why I'm a loyal reader of AR. Great, simple solutions to problems all of us encounter. Thanks for the info!
 
Posts: 1135 | Location: corpus, TX | Registered: 02 June 2009Reply With Quote
One of Us
posted Hide Post
I just keep mine cool and dry.In my shop I try to keep it about 65-75 degrees.
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
One of Us
Picture of Zoboomafoo_dude
posted Hide Post
If you ever get new furniture they come with big bags of the desiccant. I use these in my safe and haven't had any problems with corrosion.
 
Posts: 93 | Location: New Orleans, LA | Registered: 08 October 2005Reply With Quote
One of Us
posted Hide Post
TheAC in my shop is 73 degrees 24/7/365. Moisture is no problem.
GOOD LUCK and GOOD SHOOTING!!


IF YOU'RE GONNA GET OLD,YOU BETTER BE TOUGH!! GETTIN' OLD AIN'T FOR SISSIES!!
 
Posts: 381 | Location: Sebring, FL | Registered: 12 June 2005Reply With Quote
one of us
Picture of Blacktailer
posted Hide Post
This probably has a lot to do with the weather (humidity) in your particular area. My area has very low humidity and mild climate so it has never been a concern. I would imagine in Florida or other areas with high humidity, you would need to use some kind of desiccant.


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
 
Posts: 3831 | Location: Cave Creek, AZ | Registered: 09 August 2001Reply With Quote
one of us
posted Hide Post
I keep my powder locker in my basement, which is a constant temperature year round. It is a 2 ft. by 3 ft sheetrock lined 3/4 inch plywood box on casters that I have been using for 5 years. I have reloaded for 36 years and I have never used a moisture inhibiting agent before, however the bowl of rice seems reasonable. Good shooting.


phurley
 
Posts: 2371 | Location: KY | Registered: 22 September 2004Reply With Quote
One of Us
posted Hide Post
Primers and power stored in separate wooden boxes, in the basement with a dehumidifier machine that keeps my power dry and my tools from rusting.
 
Posts: 308 | Location: Durham Region Ont. Canada | Registered: 17 June 2006Reply With Quote
One of Us
posted Hide Post
I keep my primers - all 10K of them in 1" thick walled wooden boxes and add a couple pouches of silica to the container. This keep s it very dry!
 
Posts: 155 | Location: West Virginia | Registered: 13 April 2008Reply With Quote
One of Us
posted Hide Post
Aren't those storage containers supposed to be able to vent in case of ignition? stir
Thus a old refrigerator with a chain around it so's the door can open a couple of inches would be a better choice. Smiler


Aim for the exit hole
 
Posts: 4348 | Location: middle tenn | Registered: 09 December 2009Reply With Quote
One of Us
Picture of Sam
posted Hide Post
Primers in ammo cans. Powder in tighty capped original containers. Both in a wodden cabinet in my reloading room, 68 to 74 degrees normal heat/AC.


A bad day at the range is better than a good day at work.
 
Posts: 1254 | Location: Norfolk, Va | Registered: 27 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia