The Accurate Reloading Forums
Barnes reloading data for 300wsm

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/889100621

30 March 2004, 10:48
cobia79
Barnes reloading data for 300wsm
Does anyone have or know where I can find reloading data for the barnes bullet 180 gr for the 300 short mag. I've been surfing the net and its seems to be a guarded secret.
Thanks for the help.
30 March 2004, 11:18
ShopCartRacing
The Barnes #3 book should have it.
I could be wrong.

-Spencer
30 March 2004, 11:33
DesertRam
It is in the #3 manual, but some corrections have been made.
31 March 2004, 10:53
OldGuy
TSX - First try at range



Just got back from the range with my first (3 round) ladder loads for the Barnes .308 150 gr(BT) & 168 gr(BT) TSX's in my 300 WSM.



150 gr BT Barnes TSX (Seated to 2.860 COL)

65.0 grains H4350 = 3 shot 100 yd. group .310"





168 gr BT Barnes TSX (Seated 2.860 COL)

61.0 grains H4350 = 3 shot 100 yd. group .360"



Be advised - this was in my Savage Model 10 Tactical and may differ in your rifle. 62.0 grains H4350 with the 168 started to stiffen bolt lift. When I retry these two loads - I will try to get some velocity data - if my chrono still works!



Copper deposits still present , but more tolerable than with the 150 & 165 XLC's I previously tried and found to shoot terrible! Penetration was completely through an 11" Bridge timber backstop (in front of dirt bank). Could not verify pass through on the 8" railroad tie which just happened to be behind the bridge timber on some of the shots.
31 March 2004, 13:53
RuffHewn
Cobia79, for which powders do you need data? I only have info for the X and XLC, not the TSX, but if what I have will help I will be glad to post it.
31 March 2004, 15:46
BigMoe1014
I have lots of reloading data from Barnes. If you would like, I will give it to you. But, you can get it from Barnes ,by calling them, and asking for a ballistician. Then ask he/she for what you want. That's what I did.
01 April 2004, 06:51
OldGuy
Update for loads listed for 150 & 168 TSX's



The ACCURATE loads listed above, luckily, repeated today and I got some Velocity data too.



300 WSM - 150 gr. Barnes TSX (BT) ), Fed 210M, 65.0 gr H4350, seated 2.860 COL - 3 shot ave velocity = 3197



300 WSM - 168 gr. Barnes TSX (BT) , Fed 210M, 61.0 gr H4350, seated 2.860 COL - 3 shot ave. Velocity = 3022
02 April 2004, 14:57
cobia79
Thanks I will take what ever you got. I appreciate the help.
02 April 2004, 14:59
cobia79
Yes, if you would post I would aprreciate it. Did you get there number from there website? Thanks.
03 April 2004, 13:14
RuffHewn
180 gr XLC FB and XLC BT

RL19 64.0 gr 2821 fps to 69.0 gr 3037 fps
RL22 67.0 gr 2884 fps to 72.0 gr 3096 fps
H4831 67.0 gr 2805 fps to 72.0 gr 3011 fps
VVN560 66.5 gr 2840 fps to 71.5 gr 3050 fps