Might have just been that lot, I don't know. My preference is for Winchester brass--I've had as good a luck with it as even Norma and Lapua.
green 788
------------------
http://stevespages.com/page8.htm
30-30win, 5 rnds 5 splits
I pulled and dumped the rest.
This was all range brass so I guess thats the hazards of picking stuff up (and in fact I don't pick up rifle brass at all unless its shiny new) I have never heard anything bad about PMC brass.
Wes
------------------
http://ktsammo.250x.com
First is my Howa 1500SA Varminter in 223. PMC brass is made to military specs so it is very stout, but also needs a little attention when reloading to get the best results. My rifles favorite load is a 40 gr Ballistic Silvertip over 27.5 gr H-335 over a CCI-BR4 primer in prepped PMC cases and averages 3650 fps. This load will average 3/8" five shot groups at 100 yards.
My other rifle is an LAR 50 BMG Match rifle. I use ONLY PMC brass that are heavily prepped into match ammo. With its favorite load, 750 gr A-Max(moly), 225.0 gr H-50BMG and a CCI-35, good for 2735 fps. This load will consistantly punch 3/4 moa groups at ranges out to one mile and I have fired a few very good sub 1/2moa groups at 1000 yards.
So I am happy with PMC brass but as I stated, I prep my brass a great deal, unprepped brass may not perform as well.
Good Shooting!!!
50