THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
416 remington magnum
 Login/Join
 
One of Us
posted
Am shooting a 400 grain nosler with 79 grains of RE15, super accuracy. Not yet run it thru the chrono, but no sign whatsoever of any pressure.

I am now looking at the 400 grain barnes banded solid, should that be loaded with less powder? The barnes manual says max is 77 grains of RE15!

Anyone here with 1st hand experience of barnes solids with conventional softs, to get them to shoot to the same POA?

Thanks,

Reddy375
 
Posts: 2583 | Location: New York, USA | Registered: 13 March 2005Reply With Quote
One of Us
posted Hide Post
Reduce your starting loads well below max and slowly work up. Be patient and take your time.
 
Posts: 2627 | Location: Where the pine trees touch the sky | Registered: 06 December 2006Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Yep, the monometal bullets are quite a bit less forgiving when pushed down a barrel. I run the same charge wt. in my 404jeffery, softs or solids, but I am not running max loads either.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia