What's the deal with RCBS decapping pins

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/8751024342

05 July 2018, 00:31

richj

What's the deal with RCBS decapping pins

I have
Straight thin
Straight fat
Stepped fat

now ran across a dies set that uses

Stepped thin.

05 July 2018, 11:25

georgeld

Send THEM an 'email asking.

Believe all I've seen in RCBS had heads and were 1/16" pins.
George

"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight

13 July 2018, 04:46

416RigbyHunter

There are quite a few styles used over the years, the one that looks like a ‘nail’ with the head on it is the most common.
There are older die sets from the 50’s-70’s with no heads, just straight.
There are stepped, with .079” pin and stepped .081” and small .069” from way back when.
New dies use the .079” headed pin.

Cheers.