THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re10X and 223Rem.
 Login/Join
 
one of us
Picture of Jay Gorski
posted
Hello, Besides what Alliant gave me for load data, what loads are some of you shooting with RE10X and 52,53MKs, and 55VMAXs? And if I could ask, what's your best group so far at 100yds.? Thanks, Jay
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
one of us
posted Hide Post
RL 10 X is just Alliants version of IMR 3031 and Hodgdon's Benchmark.

Cheers and good shooting
seafire
 
Posts: 2889 | Location: Southern OREGON | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
I'm loading 22.8 grains under a Mollied Hornady 52 A-Max. Best group so far was a .079" but I know that was a fluke. With my PSS I expect groups in the 2s & 3s. Doesn't always happen though. 3 years and 1500 rounds and I finally have found "The Load" for my rifle! Good luck, I think you'll find that RX 10 is a wonderful powder for 223 and lighter bullets.



Rick
 
Posts: 178 | Location: North Alabama | Registered: 15 June 2002Reply With Quote
one of us
Picture of Jay Gorski
posted Hide Post
Quote:

RL 10 X is just Alliants version of IMR 3031 and Hodgdon's Benchmark.

Cheers and good shooting
seafire




seafire, You mean they're all close on the burn chart, 10x is made in Sweden, BM is made in Australia. Jay
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia