THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Shell Holder .475 No 2
 Login/Join
 
John Hipwell
One of Us
posted
After reloading only 47 rds of .475 No2 I have had the rim of the RCBS shell holder pull off. Anyone know where I might get a thicker shell holder custom made?

Thanks John
 
Posts: 137 | Location: Manitoba, Canada | Registered: 25 August 2007Reply With Quote
butchloc
One of Us
posted Hide Post
RCBS will replace it for you, next time use better case lubing
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
John Hipwell
One of Us
posted Hide Post
Thanks, it was RCBS lube and reloading these cases is a breeze, I was very surprized to have it brake. Due to the very thick rim on the .475 No 2 it would make better sense to have a thicker shell holder and as I am not running the dies down to the shell holder there is plenty of clearance.
 
Posts: 137 | Location: Manitoba, Canada | Registered: 25 August 2007Reply With Quote
N E 450 No2
one of us
posted Hide Post
John

I broke a RCBS shell holder for the 450 No2.

I then ordered a few spares, I have not broken one since.

Also I recommend Imperial Sizing Die Wax.
It is the best case lube I have ever used.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia