THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
how much to bell case
 Login/Join
 
new member
posted
When flaring/belling case mouth for bullet seating, do you just do enough to get bullet started or do you flare the whole length the bullet will be inside the case?
 
Posts: 19 | Location: Alaska | Registered: 28 December 2008Reply With Quote
One of Us
Picture of Labman
posted Hide Post
Just enough to get the bullet started. Too much expansion will shorten the life of your brass.


Tom Z

NRA Life Member
 
Posts: 2346 | Location: Pennsylvania | Registered: 07 January 2005Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
Just enough to get the bullet started

+1 thumb


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by ramrod340:
quote:
Just enough to get the bullet started

+1 thumb

+2 thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of fredj338
posted Hide Post
quote:
Originally posted by chumly:
When flaring/belling case mouth for bullet seating, do you just do enough to get bullet started or do you flare the whole length the bullet will be inside the case?

If you flare it that far, the case won't fit in the sizing die. If the bullet starts, it's enough.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
new member
posted Hide Post
Thanks!
I am a rookie.
 
Posts: 19 | Location: Alaska | Registered: 28 December 2008Reply With Quote
One of Us
Picture of seafire2
posted Hide Post
We were all rookies once...don't sweat it..

When I bell a 30/30 case or a 444, I have the die adjusted so that you can barely tell it has been belled at all...

looking closely you can see it...

I've reloaded cases 10 times, and still didn't have a neck split by belling them...


Life Member: The American Vast Right Wing Conspiracy

Jan 20, 2009.. Prisoner in Dumocrat 'Occupied America', Partisan in the 'Save America' Underground


Beavis..... James Beavis..... Of Her Majesty's Secret Service..... Spell Check Division



"Posterity — you will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it."
John Quincy Adams

A reporter did a human-interest piece on the Texas Rangers. The reporter recognized the Colt Model 1911 the Ranger was carrying and asked him "Why do you carry a 45?" The Ranger responded, "Because they don't make a 46."

Duhboy....Nuttier than Squirrel Poop...



 
Posts: 9316 | Location: Between Confusion and Lunacy ( Portland OR & San Francisco CA) | Registered: 12 September 2007Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by fredj338:
If you flare it that far, the case won't fit in the sizing die.


There's something wrong with this statement that confused me so it should confuse a newby, too.

Isn't the sequence; resize, bell, seat?
 
Posts: 4799 | Location: Lehigh county, PA | Registered: 17 October 2002Reply With Quote
one of us
posted Hide Post
I think he probably meant the seating die. Big Grin
 
Posts: 495 | Location: South Texas | Registered: 13 November 2003Reply With Quote
new member
posted Hide Post
All is well, Made up three different loads for
45 colt, unique, universal, and trailboss.
To dark to shoot now , but tomorrow...
Oh, I am loving this already.
Thanks to all on the forum.
I'm sure more questions will follow.
-The Rookie-
 
Posts: 19 | Location: Alaska | Registered: 28 December 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia