The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Foster Bushing Bump Neck Sizing DieGo | New | Find | Notify | Tools | Reply | |
| Foster Bushing Bump Neck Sizing Die | Login/Join |
One of Us |
Can I use this die to do the first resizing of band new unfired brass? Or do I need to run the brass through a full length sizer die first? Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | ||
|
| One of Us |
I bought the Forster neck bushing/shoulder bump die for my 300 WSM. I sized my cases then loaded 24. I went to the range and when I flipped the safety off the gun went off. Tried several more and same thing. I called Forster and they asked me to send the die back with some unfired, sized cases. I did and am waiting to see what they say. I shot Factory ammo in my rifle with no problems. | |||
|
| One of Us |
I use the Forster bump die for two cartridges, and still use the FL die for the initial sizing and after annnealing. The only differences is that the FL die will size the web/head area and open up any tight necks. Since most new brass I've seen is undersized to start with, it should be no problem to use the FL die and in the event there's a case or two a little big in the butt, you can prevent any initial chambering problems in that area. One thing to keep in mind when using Forster's bushing dies, especially if you have been using Redding bushing dies: Forster bushings should be screwed down fairly firmly as opposed to the Redding dies which should be left a tiny bit loose inside the die. I can tell you from my own experience that the difference in the case produced is real. Also, there is a top and a bottom to the bushings. If the enemy is in range, so are you. - Infantry manual | |||
|
| one of us |
I've had the bump die on order for my .308 for many months....hope to get one someday!! When I do get it I still won't monkey around with new brass before the first firing any more than plunging a expander ball in the neck and chamfering and loading. I always figure the time prepping should come after fireforming somewhat to the chamber. | |||
|
One of Us |
There is no way a sizing die can cause this to happen. You have a rifle problem. ____________________________________ There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice. - Mark Twain | Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others. ___________________________________ | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Foster Bushing Bump Neck Sizing Die
Visit our on-line store for AR Memorabilia