Looking for information on AR2013 Powder. Is there an equivalent? Is it imported by ???

Jim

Hey Jim
I don't know of AR2013
If you mean AR2213 it is also H4831 it is made downunder by ADI for Hodgdon.
It is approximate to
IMR 4831
WMR
MRP
AA3199
Regards
Deafdog

------------------
deafdog@turboweb.net.au
http://deafdog.turboweb.net.au

The ADI guide list two forms of this powder; AR2213 and AR2213SC. I don't use either, so I can't elaborate on the differences.

2213 is listed as being similar to IMR4831/WMR/AA3100, whilst 2213SC is listed as similar to H4831 (possibly identical as ADI makes some of the H powders).

Thank you for the help. Sorry for the error at the keyboard, I do mean AR2213

Jim

AR 2213 is no longer made, only AR2213sc is. SC stands for short cut but AR2213sc is slightly slower than AR2213.
I read in the December issue of BGRC news letter that ADI will release this year in Australia AR2213(H) that is the same as H4831 and is 2-3% slower than AR2213(sc?) it was stated that it was not currentley available then.

fyi
AS-30N = CLAYS
AS-50N = CLAYS INTERNATIONAL
AP-70N = CLAYS UNIVERSAL
AR2205 = H4227
AR2207 = H4198
AR2210(H) = H322 (the AR is not available yet)
AR2206(H) = H4895 (the AR is not available yet)
AR2208 = VARGET
AR2209 = H4350
AR2213(H) = H4831 (the AR is not available yet)
AR2218 = H50BMG
Above is what was printed in the news letter and is not complete list of ADI powders, I'm using AR2217 in my 416 and I think it is same as H1000.

I was not happy when they dropped 2213 as I had a nice load for my 6mm and have had to start load development for 2213sc. If they drop 2213sc for 2213(H) I'm going to be a little miffed.

[This message has been edited by 416SW (edited 03-29-2002).]