THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
9mm AR15 using AA#7 - UZI mag from RRA
 Login/Join
 
new member
posted
This may be the wrong forem ..... having 2nd to last shot jam, nose up, in UZI mag from RRA. The load was 7.8 gr of AA#7 w/125 gr Rem bullet/small pistol primer, assorted cases. Also occurred using NORINCO 9mm ammo. Mag loaded to 25 rounds.

A suggestion was to load "hotter" and graphite the mag. SO I am loading 8.3 gr of AA#7. AND will graphite the mag...............

Thoughts??
 
Posts: 2 | Registered: 20 December 2007Reply With Quote
One of Us
posted Hide Post
thats sounds good i shoot 8.8grs with 124 raniers. havent chronoed them yet. but figure i get 1225+ out of my beretta. loaded COL is 1.16" a pretty accurate loading form my gun anyway
 
Posts: 168 | Location: michigan | Registered: 06 August 2007Reply With Quote
One of Us
posted Hide Post
If you are getting jams on your next to the last round with two different make bullets, it is probably the spring tension on the magazine not the rounds themselves. Try AA#5 in the 9mm if you haven't. Kudude
 
Posts: 1473 | Location: Tallahassee, Florida | Registered: 04 January 2005Reply With Quote
new member
posted Hide Post
Thanks for the input. The 8.3 grs of AA #7 has a OAL of 1.132 and the 7.8 gr loads were 1.120
I'll work the mags.
 
Posts: 2 | Registered: 20 December 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia