Hi again to all...I have a request for someone with quickload...
Would someone with this program please run the following for me??
Cartridge: 8mm-06
Brass: rem. 30-06 Resized
Bullet: Sierra 175 Spitzer (Flat Base)
Powder(s): H4895, H414, and H4350
OAL: 3.25"
Need recommended starting and max loads, along with expected velocities, running standard
30-06 pressures...
Thanks a bunch (in advance ), and God bless!
Jeremy

Oops, almost forgot...
Barrel Length: 23.5"

Thanks!!
Jeremy

Quickload V.3.2
8mm-06
Max average pressure for 30-06 is 60,000 psi
Barrel = 23.5"
OAL = 3.25
bullet: .323, 175, Sierra SP 2410

H4895 54 gr 2816 fps 60,000 psi 96.6% Powder fill
H414 61.3 gr 2884 fps 60,000 psi 99.6% Powder fill
H4350 57.5 gr 2615 fps 43,338 psi 100% Powder fill
H4350 60.3 gr 2758 fps 50,800 psi 105% Powder fill
H4350 63.3 gr 2908 fps 60,000 psi 110.1% Powder fill

It has been my experience that you can use up to ~98% powder fill on ball powder and ~105% with stick powders. Any more than 100% stick powder fill and you will hear some crunch when the bullet is seated.

tnekkcc-
Thanks a bunch! Those numbers have me kindof excited about my 8mm-06 project...
I know it took a little while to work up those #'s, I really appreciate you taking the time to help me out!
Again, thanks for the help!!
Jeremy