THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    What is your favorite powder w/ 150s in the 30-06?

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
What is your favorite powder w/ 150s in the 30-06?
 Login/Join
 
one of us
Picture of Reloader
posted
My favorite has been 49 grains of H4895 for 2950 fps.

I just wanted to see what everyone else was having luck w/.

Good Luck!

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
one of us
posted Hide Post
I've shot more deer with the 150 grain Speer spitzer on top of a mild load of 57.5 grains of IMR 4350 than any other and were talking truckloads here.


Leftists are intellectually vacant, but there is no greater pleasure than tormenting the irrational.
 
Posts: 2899 | Registered: 24 November 2000Reply With Quote
One of Us
posted Hide Post
I know that 4895 is one of the better powders for the '06 (in addition to 4350), but i've had excellent results with 4064 and 150's. 51-53grs has always given me good groups with velocities in the 2900 fps +/- range.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
one of us
Picture of Ol` Joe
posted Hide Post
Mine likes IMR4350 with Hornady 150 SPs


------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray


"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".



 
Posts: 2535 | Location: Michigan | Registered: 20 January 2001Reply With Quote
one of us
posted Hide Post
My favorite is 62 grains of RL-19 with a 150 Ballistic Tip.
 
Posts: 388 | Location: Wisconsin | Registered: 05 May 2002Reply With Quote
One of Us
posted Hide Post
Here is a vote for IMR4350.
 
Posts: 118 | Location: Lakeville, MN | Registered: 04 February 2005Reply With Quote
one of us
posted Hide Post
I got good results with most powders back when I was loading the 30-06 with 150 gr bullets, including IMR-4985, IMR-4064, IMR-4350 and Reloder 15. But my best accuracy and velocity was with Accurate 2700, with maximum loads around an inch and chrongraphing almost 2900 fps out of a 20 inch barrel. Haven't heard of very many people using Accurate 2700 in their '06's, but it sure worked in mine.


Bullets are pretty worthless. All they do is hang around waiting to get loaded.
 
Posts: 515 | Location: kennewick, wa | Registered: 18 May 2004Reply With Quote
one of us
posted Hide Post
IMR 4064


it's a fresh wind that ... Blows Against the Empire
 
Posts: 225 | Location: houston, tx | Registered: 04 February 2003Reply With Quote
one of us
posted Hide Post
The one I can buy the cheapest. I brought a bunch of imr 4064 at 6bucks a lb shot that all up. Then I got a hold of a bunch of bal c2 at 5bucks a lb.shot that all up. As in a bunch I am talking 30 to 40lbs of the stuff.

Now I am shooting surplus wc844 and wc852 they work fine also. The only thing I can say is I wish I would of had the money to buy hundreds of lbs at the right price instead of 30 or 40 lbs.
 
Posts: 19710 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
IMR-4350 From 54.6 grains to 61.5 grains
Winchester WLR Primer
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by ned:
IMR 4064


Same here IMR4064 Big Grin
 
Posts: 2361 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
In the Browning Continental o/u the IMR 4320 and 4350 were tied for accuracy and regulation.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
one of us
posted Hide Post
I started off reloading 30-06 and used 4064. Some 37 years later,my gunsmith/friend showed me in his old Lyman manual that 4350 was listed as the accuracy powder. He further elaborated that it is THE ONE. I tried it and 4064 does better in my gun.
 
Posts: 1289 | Location: San Angelo,Tx | Registered: 22 August 2003Reply With Quote
one of us
posted Hide Post
51.7 imr 4064
 
Posts: 64 | Location: Utah | Registered: 02 January 2004Reply With Quote
one of us
posted Hide Post
For a long time I thought that IMR 4064 was best for 150 gr. bullets in the 30-06. But recently I tried H 414, and I now think it may be best, at least in my rifle.

Varget gave excellent accuracy in my rifle with 150 gr. bullets, but at a sacrifice of about 150 f.p.s. of velocity from what I can get with IMR 4064 or H 414.


"How's that whole 'hopey-changey' thing working out for ya?"
 
Posts: 5883 | Location: People's Republic of Maryland | Registered: 11 March 2001Reply With Quote
one of us
Picture of Tiny
posted Hide Post
Mine likes H-414,but does A-ok with others, so if there is "THE Powder" for the '06 I ain't found it yet. Wink


Have a Great Day and God Bless
 
Posts: 205 | Location: East Tennessee | Registered: 19 July 2002Reply With Quote
one of us
Picture of Reloader
posted Hide Post
Any of you ever tried H380 w/ the 150s?

Hogdons website shows it getting over 3000 fps w/ reasonable pressures. I have only used H380 in 30-30 win and some 180grn 30-06 loads.

Might be a good powder to try.

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
One of Us
Picture of Brad
posted Hide Post
21" bbl. M70
150 Gr. Hdy FBSP
62 Gr's H4350
WW Brass
WLR Primer
3,020 fps.
 
Posts: 3525 | Registered: 27 June 2000Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by waxman:
My favorite is 62 grains of RL-19 with a 150 Ballistic Tip.


61.5 grain and same weight Nosler Partition.
 
Posts: 8211 | Location: Germany | Registered: 22 August 2002Reply With Quote
One of Us
posted Hide Post
My favorite load for the 30/06 is 51.2gr. or 52.0gr. of IMR4064 with a 150gr. bullet. Every rifle in this caliber in which I have used either of these loads have shot at least MOA.
 
Posts: 152 | Location: Missouri | Registered: 15 January 2004Reply With Quote
One of Us
posted Hide Post
I have to go along with 52 gr of IMR4064. That load has shot well in every '06 I've tried it in. IMR4350 does provide better velocity, though.
 
Posts: 284 | Location: Orange, CA | Registered: 05 January 2005Reply With Quote
new member
posted Hide Post
i find that in my rem 7400 30-06 51.5gr h414 150gr speer spritz works great for me
 
Posts: 6 | Location: tigard oregon | Registered: 29 January 2005Reply With Quote
one of us
posted Hide Post
Big Grin

My favorite 150 grain bullet & powder in the .30/06 Sprg. is:

Remington 150 gr. Bronze Point

62 grains of H-4350.

Try it - you'll like it! thumb


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
one of us
posted Hide Post
I like 51 to 55 gr of AA 4064.


Remember, forgivness is easier to get than permission.
 
Posts: 3994 | Location: Hudsonville MI USA | Registered: 08 June 2000Reply With Quote
<slancey>
posted
62 gr. H4350
150 Speer Hot-Cor
Win. Brass
WLR primer
.007" off the lands
 
Reply With Quote
One of Us
Picture of Hornhunter
posted Hide Post
57.0 gr. of W 760 behind a 150 gr. Sierra Spitzer or Nosler Ballistic Tip @ 2900 fps
 
Posts: 46 | Location: Lake Jackson, Texas | Registered: 14 February 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    What is your favorite powder w/ 150s in the 30-06?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia