THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
M77 trigger work over
 Login/Join
 
One of Us
posted
Smiler For those that might not know about it, as I didn't, on the Gun Smithing section is a post called "smoothing the Ruger 77 trigger" I down loaded it and printed out the picture and took the trigger apart. Then with my dremil took I carefull changed it as the picture shows. Then I polished the pins. Man did it make a big differance! It is real crisp with out any creep and about 2.5 LBS just right for me. A lot better than before!
 
Posts: 671 | Location: none | Registered: 14 February 2005Reply With Quote
One of Us
posted Hide Post
SmilerCorrect that, 2.0 LBS now!
 
Posts: 671 | Location: none | Registered: 14 February 2005Reply With Quote
One of Us
posted Hide Post
SmilerI thought something was wrong with my guage for trigger pull so I checked it out with another. I was setting the trigger pull on my new Savage .223 and set it about 1 1/4 pounds then check the reworked M77 Ruger and it was 3/4 lbs.! Knew it was less than 2 lbs for sure!
 
Posts: 671 | Location: none | Registered: 14 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia