I cannot find data for the 115 grain ballistic tip for the 25.06? I would like to use H4831SC. Does anyone have a minimum and max load as well as the COAL. Thanks Esox357.

Really depends on your rifle but 51 grains would seem to be a safe max. and 47 grains a reasonable min. This should at least give you a starting point. roger

I checked several source I have and could not find h4831 with a 115gr Nosler. With a 115gr Barnes TSX the data was 47gr to 52gr max and with Berger VLD's it was 47 to 54.3gr max. I set the OAL either based on magazine space or .010" off the lands to start and work from there. With Barnes, I start at .030" off the lands and work back to .050" or more off the lands.

Thankyou guys for the assistance I will give it a go around and see what happens hopefully a good hunting load! Thanks Again.

Goto Hodgdon's reloading data center online.... http://www.hodgdon.com/ ... It has lots of good reloading data for 117 and 120 gr bullets...pick a powder, start at the bottom load and work up slowly.

You probably WON'T find specific reloading data fore the 115 Nos as it is a fairly new bullet unless you surf the net.

Luck

Should I use the 117 data then? I checked the net just not a lot of information and I didn't know if I could use the 117 data? But if all else fails than I guess I will invent the load. Thanks.

http://i433.photobucket.com/al...q59/Esox3006/061.jpg

http://i433.photobucket.com/al...q59/Esox3006/062.jpg

Some results that I got with the H4831 SC and 115 BT.