THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
IMR4064 in 375 H&H
 Login/Join
 
One of Us
posted
I can't find RL15 anywhere so I decided to try 4064 with 270 TSX. anyone use this powder in the 375 H&H? any loads you found to be accurate for 270gn bullets?
 
Posts: 973 | Location: Rapid City, SD | Registered: 08 July 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
My 375s shoot well no matter what you put into them; it is inherently a good, well balanced caliber. Load some and shoot; you will be pleased. That's a good thing about 375s; they shoot any powder from 3031 to 4831 and anything in between; very versatile.
 
Posts: 17373 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
Picture of Wendell Reich
posted Hide Post
I know powder availability may be a problem, but if you have (or can find) RL 19, might try it. My 375 loves it. 3/4" - 7/8" consistently with the 270 TSX.

Good luck, it sucks to have to develop a new load based on what powder you can find. I'm in the same boat with my 7mag right now.
 
Posts: 6273 | Location: Dallas, TX | Registered: 13 July 2001Reply With Quote
one of us
posted Hide Post
IMR-4064 is an old standby powder in the .375 H&H with both 250, 270 and 300 gr. bullets..O'Connor used it a lot in his .375..

The 375 H&H isn't picky about powders, it shoots and performs great with a lot of powders.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of Blacktailer
posted Hide Post
quote:
The 375 H&H isn't picky about powders, it shoots and performs great with a lot of powders.

+1


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
 
Posts: 3831 | Location: Cave Creek, AZ | Registered: 09 August 2001Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
If you can find some Norma 203B you can use it to replace the RL-15.


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
one of us
Picture of Fjold
posted Hide Post
I use IMR 4064 with 300 grain TSX and it shoots sub MOA right at 2,500 fps.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12754 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
IMR 4064 is the most accurate powder in my Sako Safari .375 H&H.

Give it a try and I think you will be pleased.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
One of Us
posted Hide Post
I started with 4064 back in the late fifties and still use it, but in this century I use a little more RL 15 as it meters a little smoother for me.
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
Picture of Rapidrob
posted Hide Post
http://www.reloadersnest.com/q...82&Powder=IMR%204064


Gulf of Tonkin Yacht Club
NRA Endowment Member
President NM MILSURPS
 
Posts: 450 | Location: Albuquerque | Registered: 28 March 2013Reply With Quote
One of Us
posted Hide Post
H414 is the powder I use in 375H&H. My 7mm-08 likes it too.


Zinfandel and venison are GOOD!
 
Posts: 51 | Location: Mendocino County California | Registered: 26 January 2010Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by gohip2000:
I can't find RL15 anywhere so I decided to try 4064 with 270 TSX. anyone use this powder in the 375 H&H? any loads you found to be accurate for 270gn bullets?


I've used IMR 4064 for years in the 375 H&H, and it works just fine.


Remember, forgivness is easier to get than permission.
 
Posts: 3994 | Location: Hudsonville MI USA | Registered: 08 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia