THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Reloader Web site loads
 Login/Join
 
One of Us
posted
Do you find the recommended loads on the Reloader web site to be a bit stiff. Seems like every load recommended on that site is at least a few grains heavier than some of the books that I have.
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
one of us
Picture of Canadian reloarder
posted Hide Post
I haven't checked all of their powders that I use but their data for RL 26 is a tad hot in my rifles, espically in the 300 Win mag.


"300 Win mag loaded with a 250 gr Barnes made a good deer load". Elmer Keith
 
Posts: 172 | Location: Canada | Registered: 06 August 2003Reply With Quote
One of Us
Picture of MyNameIsEarl
posted Hide Post
I have used their data for a couple different powders to get a launch. I have found their listed load to be a max load in my rifles. Their Reloader 19 recipe was .5 grain below what I found to be max in my 270 WSM.
 
Posts: 768 | Location: Camp Verde, AZ | Registered: 05 February 2006Reply With Quote
one of us
Picture of Fjold
posted Hide Post
I use their information and find that it's probably the one manufacturer that is realistic about their limits. Almost every other component manufacturer who provides reloading data down loads their data to below maximum.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12754 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia