hello..looking for recommended loads for 140 grain bullets for the 6.5 x 68.....have a 1-8 twist barrel...any info/suggestions would be appreciated...thanks..john

From Nick Harveys Practical Reloading Manual
61-63 grns H4831
He claims you can use 264 mag data. The 68 case is very thick, so it might be a little less capacity than the 264.

John I have a Voere rifle in 6.5x68 .It has a much slower twist than your barrel and the throat is quite long .My rifle will not group anything heavier than 130 gr bullets. I use RWS brass CCI 250 primers and 129 gr Hornady or 125 gr Partitions. The Hornady groups better but is a little soft so no close shots. The following are MAX loads in my rifle so I suggest you start about 4 grs below.
66 grs of H4831 and 129 gr for 3150 Fps
70 grs of IMR 7828 and 129 for 3200 fps Both of these loads group under 1 inch @ 100 yds. I've taken several deer and antelope with these loads and there is much less meat damage if shots are over 150 yds.

thanks to each of you,,, this what i like best about a/r...the sharing of knowledge!!!!!..john