Would someone please post the reccomended loads from a Speer manual for the 50 gr TNT-s------Ihave Hornady---Nosler---Sierra---manuals-----so far nothing they show helps me------
Thanks RL

re-loader, I hope this is what you are looking for. *Nut*

From the Speer #11 Manual
223 Remington
Rifle: Ruger Mini-14
Barrel: 18 1/2"
Twist: 1-10
Cases: W-W
Primers: CCI-400, 450
* (Denotes use of CCI #450 Mag primer)

50 gr. Spitzer (Sectional Density= .142) (BC= .231)

Powder
Grains FPS
748
*29.5 3276
*28.5 3153
*27.5 3044

IMR 4320
28.0 3213
27.0 3090
26.0 2979

H335
*28.0 3336
*27.0 3211
*26.0 3094

BLC2
*27.5 3313
*26.5 3196
*25.5 3063

IMR 4895
27.0 3149
26.0 3036
25.0 2933

IMR 3031
27.0 3256
26.0 3138
25.0 3023

N201
27.0 3203
26.0 3087
25.0 2951

H332
26.0 3138
25.0 3013
24.0 2896

IMR 4198
22.5 3185
21.5 3053
20.5 2917

[This message has been edited by Nutoy (edited 02-16-2002).]

Just start on the low end of any 50 gr bullet and work up. looking at the primer and using a chronograph to check the vel. when you are near the proper vel and accuracy is good you have a load.