Is it possible to use this type work cabinet for mounting a Dillon XL650?
I haven't bought either yet, but I would like something that I can roll from one room to another and cover.

If you sit up close to it .........your knees will go where ?

I think a progressive press works best on the most rock solid mount you can give it. You'll be working that lever like a one-armed bandit.

You could actually build a simple bench and put rollers on it. The top should be made with 2x10s and the rear legs could be 6x6 and front legs 4x4. This will give you plenty of counter weight in the rear while operating the press without it getting tipsy.

Another option and good for storing stuff is the pictured tool box with a side shelf added to it so you could sit with your knees under the extension. Just using the tool box will have standing for all the work.

quote:

Originally posted by RugerNiner:
Is it possible to use this type work cabinet for mounting a Dillon XL650?
I haven't bought either yet, but I would like something that I can roll from one room to another and cover.

Yes, if it is mounted on a Strong Mount http://dillonprecision.com/template/p.cfm?maj=35&min=1&dyn=1&

I find it more comfortable to load while standing though. You might look at the height of the machine/strong mount on that cabinet.

I do all my reloading standing up and had planned on using the strong mount so the drawers would be accessible.
I was wondering if a cabnet like this could handle the pressure when operational.

You could possiably look at buying a good one from sears. The Craftsman brand may let you take it back if you are not satisfied. And we have one that has stood the test of time as a tool chest.
Good Luck,
CRoberts

quote:

Originally posted by RugerNiner:
I do all my reloading standing up and had planned on using the strong mount so the drawers would be accessible.
I was wondering if a cabnet like this could handle the pressure when operational.

The 650 does not require inordinate pressure. The majority of force used in handloading is the sizing operation. If you use the set up that you show, and it appears that the top is deflecting, add a layer of 3/4" plywood(or 2) to the top. I do not think that would be needed though. I have used a Black and Decker workmate to mount a 550B on for temporary use. The top of that was 3/4" laminate that was about 3' x 6", it did not deflect.