what would be a good load for the 110 grain speer tnt bullet in 7-08. I would like to work up some loads for this bullet. any help would be appreciated.

I've been playing with 110g FMJ in 30-06 and have had some very good groups using AA-2230-C, WSR primers and keeping the velocity under 3250 fps. 7 shot groups were averaging .80" @ 100 yds.

------------------
Abe

If everyone tought like me, I'd be a damn fool to think any differently!

Hi hillbilly

I would try the IMR 4064 wich are the powder that had ben best for light bullets in my rifle. I have not have any luck with loads close to maximum with light bullets so I would recomend to start low. The most accurate load I have are a 41gr of IMR with a 120gr Sirrra sp (2650f/s). My hottest load that still give some accuracy is with Sierra 100gr hp of 45gr IMR 4064(2960f/s).
But do not trust my loads check them up in a reloding manual and develop your one load

Good luck/
PerN