Go | New | Find | Notify | Tools | Reply |
One of Us |
I just ordered a Frankfort Arsenal sonic cleaner. The commercial detergent is expensive and I would have to order it online so I am wondering if you fellas use any other detergent or home brew instead of it to clean your brass?? | ||
|
One of Us |
A teaspoon of Lem i Shine and a drop of Dawn dish soap. I use hot tap water in my cleaner. 3- 480 sec cycles usually cleans my brass completely! Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
One of Us |
I bought a jug of the Frankford Arsenal sonic cleaner....waisted $$$$$ All of the home brews out clean it ________________________________________________ Maker of The Frankenstud Sling Keeper Proudly made in the USA Acepting all forms of payment | |||
|
One of Us |
I originally tried Lemishine and Simple Green, then Lemishine and dishsoap, now I use a 50% solution of vinegar and water with dish soap. I neutralize it with baking soda in water or I get nasty looking patina. Took this guy's process as my own: http://www.6mmbr.com/ultrasonic.html All of the above will clean the hell out of gun parts too. That said, if they are not stainless, hard chrome, bake on coat, etc....they will come out in the white. | |||
|
Administrator |
We got a large sonic cleaner for cleaning gun parts and pistols. We fill the tank with water, and place whatever we want to clean in a plastic bag with diesel. Works like a charm. | |||
|
One of Us |
The four in the middle are clean the ones on both sides are "before" the sonic cleaner. Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
one of us |
I have a similar unit. Tried the Hornady stuff, Simple Green, and Lem i Shine. All seem to work. Don't use the heater, and be careful with nickle plated brass (it can discolor). Been experimenting some with the unit. Still not sure I will use it on every reloading cycle, but if you use a standard polisher (vibrating) followed by depriming, an ultrasonic cleaner does polish up the primer pockets. | |||
|
One of Us |
I have a small but industrial-strength ultrasonic cleaner and I use about two teaspoons of citric acid per gallon and a very small amount of detergent (I use about 4 mL of straight Tergitol NP-9 surfactant per gallon but hand dishwashing soap will probably work OK too). I run them for about six minutes with the bath at 50 Celsius or about 120 Fahrenheit. Then I triple-rinse them and dry in a convection oven for at least 30 minutes at 225 F. They do get real clean and the cleaning solution is very inexpensive. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia