THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
7mm bullet lengths please
 Login/Join
 
one of us
posted
Could someone(s) please post the length of any .284" bulelts, from 150-ish up?
Thank you very much!
Bwana-be
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Hey Bwana, I didn't know I had this many:

150gr Nosler Par - 1.215"
154gr Hornady SP - 1.242"
154gr Hornady IB - 1.386"
160gr Nosler P - 1.278"
160gr Nosler AB - 1.405"
160gr Comb. Tech - 1.298"
160gr Speer SP - 1.231"
160gr Speer GS - 1.170"
175gr Nosler Par.- 1.365"
175gr Rem. CL - 1.304"

I think the Speer GS are the shortest in any bullet wt. & would be a good choice for a .284 or 7-08.
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
posted Hide Post
Thank you so very much!
Just what I needed, and fast!
[Big Grin]
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
one of us
posted Hide Post
Bwana-be,

I make a .284" diameter, 127gr EXP bullet that measures 1.250" in length.

What cartridge are you using and what game are you after?

Don [Smile]
 
Posts: 263 | Location: Pennsylvania | Registered: 13 March 2003Reply With Quote
one of us
posted Hide Post
Ok Bwana, here come some more:

Nosler SBT BT 120 1.124"
Nosler SBT BT 140 1.256
Nosler SBT BT 150 1.31
Sierra SBT 150 1.195
Speer SP 160 1.230
Speer SBT 160 1.250
HornadyHPBT 162 1.4
Sierra HPBT 168 1.362
Sierra MKHP 168 1.4
Nosler SP 175 1.327
CIL RN 175 1.258

Hope this helps you out.

Cal - Montreal
 
Posts: 1866 | Location: Montreal, Canada | Registered: 01 May 2003Reply With Quote
new member
posted Hide Post
Bwana-be,
I don't want to start a pi----- contest, but your inquiry for bullet lengths should have specified how you measure them. fredy338 gave you a measurement for an OAL bullet for a Nosler 150 grn Partition and I would have given you an O-give measurement of ~ .55". I'm new to the posting business, so if out of place, tell me. Other than intially measuring a bullet's OAL for establishing depth gauge parameters, I don't use any bullet measurement but from the O-give using only the top piece of a Davidson Gage.

[ 07-13-2003, 05:53: Message edited by: ESteele ]
 
Posts: 14 | Location: Las Vegas, Nevada, USA | Registered: 23 June 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia