Wanting to put together a load for my 375 Ruger Alaskan for the new 250 Gr TTSX from Barnes. This bullet is so new they have no load data and only told me to extrapolate loads from existing data for different bullets. Anyone here have a chance to put such a load together, any loads suggested?

jcarr,

I have had very good accuracy with the following load for my 375 Alaskan with Nosler 260gr AB's:

73 Gr RL15, CCI mag primer.

This load is also right out of the Nosler manual...might be a good starting point for you with the Barnes 250's...

Good luck!

Cheers

I'd use the 270 gr TSX data and start at the bottom and work up. A lot of us have found that the 270 TSX gives us best accuracy with a mid-range load anyway (in the H&H), so you might not even need to get near the top end.

LWD

I have started working to get my load and I am using the 270 TSX and 74-75 rl5 and rl 17 may be the ticket. I have to look at the rl17 load but it was an easy 2850 with 22 inch barrel