THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Help putting together a .223 load
 Login/Join
 
new member
posted
Good evening, everyone-

I have been given several hundred rounds of .224 55 grain Nosler Ballistic Tip Spitzer bullets. I also have several tins of Varget powder. I'm looking for a good starting recipe for those two components put together in a .223 round. I also have a thousand Federal #205 small rifle primers, but I can use those elsewhere if a better primer might gain me improved performance.

Does anyone have a recommendation for the amount of powder for that bullet? I've searched online but I don't seem to be able to come up with much on the spitzer 55gn Ballistic Tip.

Thanks!
 
Posts: 8 | Registered: 14 March 2006Reply With Quote
one of us
Picture of Ol` Joe
posted Hide Post
http://www.nosler.com/Reloadin...-NATO-55-Grains.aspx


------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray


"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".



 
Posts: 2535 | Location: Michigan | Registered: 20 January 2001Reply With Quote
new member
posted Hide Post
Sheesh! I looked all over Nosler's site and found all kinds of bullets but not that one! ARGH!

Thanks so much, Joe! beer
 
Posts: 8 | Registered: 14 March 2006Reply With Quote
One of Us
posted Hide Post
Use a starting load listed in any reputable manual for Varget and any 55 grain bullet and you will have a reasonable starting point.
 
Posts: 668 | Location: NW Colorado | Registered: 10 December 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia