THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
The 338-06 and RL 15 - Max Load 210 TSX
 Login/Join
 
one of us
posted
I am working up loads for a new rifle. It is a pre 64 fwt 30-06 bored out to 338. In research for this rifle/bullet, I see Barnes showing a max load of 52 or was it 53 gr of RL 15. I have gotten to 52 and see no sighns of excess pressures.

Would you share your experience with loads at or above 52 gr of RL 15 and the 210 TSX. If you have ballistics on your load that would be great as well.

Thanks in advance for sharing your experience.
 
Posts: 1324 | Registered: 17 February 2004Reply With Quote
One of Us
posted Hide Post
Hornady's manual pushes RL 15 up to 57.1 with its 200 grain SP... if you want to use that as a mark and try working up further...

you should be fine with a TSX 210 at 53 grains.. it is fine in my 338/06 ( a rebored 270 Model 70).. with the 210 Nosler partition...

regards
seafire
beer
 
Posts: 16144 | Location: Southern Oregon USA | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
I would drop it down a bit as the Hornadys usually will take more powder than a Nosler to reach a given velocity while the TSX takes a grain less than a partition. I use Big Game in mine, gets 2800 fps and shoots under MOA in my old FN.


A shot not taken is always a miss
 
Posts: 2788 | Location: gallatin, mo usa | Registered: 10 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia