Go | New | Find | Notify | Tools | Reply |
<AVMcGee> |
See if this will help. http://internet.cybermesa.com/~jbm/ballistics/traj/traj.html Andrew V. McGee | ||
<ss8541> |
I am not sure what you are doing there Big John. I have used JBM a lot and it has been right on for me. Are you using the HV bullet from Gerard? You are right that you should have 2 points in your trajectory that the bullet passes through the line of sight. If you tell it to Zero at 100 and then tell it you want your zero to be 3" high at this range it will show you something that kind of resembles what you are saying but it will still show two intersections in your trajectory. I always just tell it to zero at a mid point like 326 for my 7 STW. This will give me dead on at 326 and then show high or low for all other ranges. Vince | ||
<ss8541> |
Maybe this will help Big John. This is from JBM. I didn't know your scope height or your altitude so I just used 1.5 and 1500 ft. Trajectory Output -------------------------------------------------------------------------------- Input Data
Calculated Table Range Velocity Energy Momentum Drop Windage Lead Time | ||
<Dave King> |
Big John Basically this is how Near and Far zero relate. As the Far zero move further from the shooter the near zero moves closer. With the load data you've given and using a 1.5 scope height and the height of the round at 250 yards your near zero is about 30 yards, not 100. The only way to have a near zero at 100 yards is to sight for something very close to 100, somewhere in the 110 yards range. BUT, if you use a scope mount that puts the centerline of the scope 5.5 inches above the bore you'll have a Near zero at about 100 yards and still be 2.5 inches high at 250 yards, your Far zero for this setup would be 340 yards and you'll be 3.4 inches low at 400 yards. | ||
<jcooper> |
I had the same issue. .. if you have MS-Excel spreadsheet software, download the freeware from: http://www.jacksonrifles.com/ballistics.htm by Pejsa. Good Luck, | ||
one of us |
Try PointBlank - visit www.huntingnut.com a download it free | |||
|
<Dave King> |
Here's another MS Excel spreadsheet or two. Try the Sniper version or the RBC (Ranging Ballistic Computer) version. They're free and not password protected so uou can modify them as you like. They can be downloaded to a handheld computer like the Casseopia and used in the field. The RBC version can be used to calculate Target Reference Point distances via GPS input and automatically figures ALL single field wind values from a single vector input. | ||
<Antonio> |
Dave King: Could you please state where such excel spreadsheets can be downloaded? Thanks, Antonio | ||
<gunboat> |
Have you tried the on-line ballistic program at the Norma website? You can input all variables such as sight height, B.C., bullet weight, velocity, etc., and it will show trajectory out to 600 yards and height of tragetory above or below line of sight at any point from muzzle on out. go to | ||
<Dave King> |
Sorry guys! got carried away with an immediate problem and forget to paste the link. The Spreadsheet is on Peter Cronhelm's pages. http://www.nucleus.com/~cronhelm/ballistics.html Forgive me for my forgetfullness.. | ||
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia