We don't see the 6x45mm much in the UK. I'm just wondering what velocities it delivers, and why you would choose it over the .243??
Just curious...
Regards,
Peter
Try to get hold of the Nov 99 issue of Man Magnum magazine. They had an article by Gregor Woods in it about this calibre. I had one built and am very impressed with it.
Mine was built with a 1 in 10 twist Vektor sport profile barrel on a Zastava Mini-Mauser action.
Accuracy is outstanding and recoil almost non existant.
The lightest bullets I have tried is Speer 75gr HP's and max velocity attained was almost 2800f/sec. I load 23gr S321 for 2600 f/sec. There is a marked difference in trajectories between the 75gr and 100gr bullets I normally use. I am now trying out the 87 grainers to see if I can get the trajectories closer to one another.
I use PMP (CW headstamp) cases. Because PMP uses thicker brass, case volume is less than some other makes and you can't get as much powder into the case. You can use converted 223 cases, with thinner case walls, but tend to pick up problems at border crossings when your firearm license shows 6x45 but your cartridges are headstamped 223. You are welcome to try to explain the matter to them.
You are welcome to contact me directly about this matter at johans@bolanddm.co.za. I am leaving for Namibia today but will be back on Thursday 25 April.
Johan
I shoot a 6X45mm/20 gauge Savage 24V ( rebored ). It has a 1:9.5 twist and I normally shoot 85 grain Noslers Partition Bullets. By the book, 55 grain loads should be about like .223 55 grain loads, e.g., same weight, similar powder charge, more cross-sectional area ( more force for same pressure ). There are loads in the Hornaday book.
Tom